Dover Wilden Advance Pro-Flo V PV400 Series, Инженерия, эксплуатация и обслуживание

Страница: 14 / 39

WILDEN PUMP & ENGINEERING, LLC 12
WIL-11100-E-05
P E R F O R M A N C E
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specifi ed so that daily operation
parameters will fall in the center of the pump performance curve.
Height .................................528 mm (20.8")
Width .................................. 384 mm (15.1")
Depth .................................. 310 mm (12.2")
Est. Ship Weight ..........................................
316 Stainless Steel 43 kg (94 lbs)
Alloy C 45 kg (100 lbs)
Air Inlet ...................................19 mm (3/4")
Inlet ..................................... 38 mm (1-1/2")
Outlet .................................. 38 mm (1-1/2")
Suction Lift ..................... 7.3 m Dry (23.8')
9.5 m Wet (31.2')
Displacement/Stroke ...... 1.10 l (0.29 gal.)
1
Max. Flow Rate ............ 333 lpm (88 gpm)
Max. Size Solids .................4.8 mm (3/16")
1 Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example: To pump 117 lpm (31 gpm)
against a discharge pressure head of
5.5 bar (80 psig) requires 6.7 bar
(100 psig) and 68 Nm
3 /h (40 scfm) air
consumption.
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
PV400 STAINLESS STEEL
RUBBER-FITTED
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specifi ed so that daily operation
parameters will fall in the center of the pump performance curve.
Height .................................528 mm (20.8")
Width .................................. 384 mm (15.1")
Depth .................................. 310 mm (12.2")
Est. Ship Weight ..........................................
316 Stainless Steel 43 kg (94 lbs)
Alloy C 45 kg (100 lbs)
Air Inlet ...................................19 mm (3/4")
Inlet ......................................38 mm (1-1/2")
Outlet ...................................38 mm (1-1/2")
Suction Lift ......................6.4 m Dry (21.0')
9.5 m Wet (31.2')
Displacement/Stroke ...... 1.14 l (0.30 gal.) 1
Max. Flow Rate ............. 337 lpm (89 gpm)
Max. Size Solids .................4.8 mm (3/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example: To pump 91 lpm (24 gpm)
against a discharge pressure head of
3.4 bar (50 psig) requires 4.1 bar
(60 psig) and 34 Nm
3 /h (20 scfm) air
consumption.
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
PV400 STAINLESS STEEL
TPE-FITTED