Model 9610 Dispenser Mechanism Installation
TRITON SYSTEMS, INC.
3
5.
Place the cable clip over the DC Dispenser Power
Cable and the EJ-to-Dispenser (Data) cable. Attach
the cable clip to the back right flange on the
dispenser using the included #8-32 screw/nut.
6.
Slide the tray into the cabinet and back out again.
Make sure the cables are free to move and do not
catch on anything.
7.
Load the currency cassette with currency. Affix the
proper denomination label to the cassette, as
needed. Slide the dispenser back into the cabinet.
Close and lock the cabinet door.
8.
Turn the ATM power switch to the ON (I) position.
Close and lock the control panel.
Attach the dispenser to the tray with two screws on
each side.
Attach the cable clip to the lower rear
flange of the dispenser.
The cables should be routed through the back slide
rail as shown.
