Dover Triton 9600 Series, Руководство по эксплуатации

Страница: 15 / 48

TRITON SYSTEMS, INC.
2-9
E*TRADE ATM SOFTWARE - ADDENDUM SECTION 2 - MANAGEMENT FUNCTIONS
F
UNCTION
: E*TRADE BINS
F
ACTORY
D
EFAULT
: N/A
A
CCESS
I
NSTRUCTIONS
:
1.) Select the TERMINAL CONFIGURATION option from the
MANAGEMENT FUNCTIONS screen.
2.) Select SET TERMINAL PARAMETERS.
3.) Select MORE.
4.) Select MORE.
5.) Select E*TRADE BINS.
D
ESCRIPTION
:
This function enables the ATM to recognize E*TRADE customer
cards using the BIN (Bank Identification Number) on the card. This
number is compared to a list of BINs stored in the terminal.
The terminal can store up to 10 E*TRADE BINs; however, only 5
numbers can be entered using this screen. Additional E*TRADE
BIN numbers must be downloaded to the terminal using Triton
Connect management software.
The terminal will compare the BIN number stored on the customer’s
card to all BIN numbers loaded. If the card BIN matches a loaded
BIN the ATM will offer E*TRADE functionality to the customer. If
the BIN on the card does not match, the ATM will offer NON-
E*TRADE options to the customer.
To enter or change a BIN perform the following:
1.) Press the key next to the block where the BIN will be entered
or changed.
2.) Enter the BIN.
3.) Press the “<OK>” key.
Repeat steps 1 through 3 until all BINs are entered (up to five).
NOTE: If the O.A.R. Switch is OFF (E*TRADE transactions are
disabled), E*TRADE BINs are treated as BLOCKED ISO numbers,
to prevent surcharging of E*TRADE customers.
E
RROR
C
ONDITIONS
:
There are no error conditions directly associated with this function.
BLOCK ISO FUNCTION
This function blocks surcharging for
transactions that use a particular fi-
nancial institution’s ATM or Credit
Card.
In previous (non-E*TRADE) versions
of ATM software, up to 100 ISO num-
bers could be entered and blocked.
However, in the E*TRADE version, 10
ISO number “slots” have been re-
served for use by the E*TRADE BINS
function, leaving a total of 90 ISO
number slots available for normal use.
Note: For additional information on
the BLOCK ISO function, refer to the
applicable ATM Operation Manual.