Dover OPW SiteSentinel Nano M2012 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 49

Dover OPW SiteSentinel Nano M2012 Скачать руководство пользователя страница 16

3.3.1 Upgrade Procedure

Figure 3-4 Upgrade Procedure

4. Connect the USB flash drive containing the Upgrade files.

5. Push the

Upgrade

button.

6. A pop-up will come into view, “Please ensure only one USB device is connected.”

NOTE:

Make sure that the only flash drive connected to the ATG is the drive that contains the

upgrade files. No other flash drive can be connected during this procedure.

IMPORTANT:

Keep the files together on the flash drive. Do not remove or copy them to any

other directory or device.

7. Push

OK

. A screen will come into view listing the files that can be upgraded.

8. Select the files to be upgraded.

a.

Html

– HTML.zip (for remote browser UI upgrades)

b.

Database

– Nano_DBUpgrade.sql (for database upgrades)

c.

Firmware

– Firmware.Zip (Main application software)

d.

Options

– XXXXXXX.ssr (the Xs identify the SD card serial number of the Nano device)

9. Push

Apply

(if you do not want to upgrade at this time push

Cancel

).

10. A progress bar will come into view.

Doc. No.: M2012 Rev.: 3

Page 16 of 49

«
...
14
15
16
17
18
...
»

Содержание OPW SiteSentinel Nano M2012


















































Отзывы:

Нет отзывов