Dover Marathon RAMJET Signature J-250SC Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 47

Dover Marathon RAMJET Signature J-250SC Скачать руководство пользователя страница 17

17

2 MAINTENANCE

PERIODIC MAINTENANCE

MONTHLY

Check external hoses for chafing, rubbing, or other deterioration and damage.

Check for any obvious unsafe conditions in the compactor area.

Check oil level in hydraulic reservoir. Level should be 3/4 of sight gauge (ram fully retracted).

Clean out or wash out debris from behind compactor ram.

Lubricate the ram guidance tracks using the grease fittings on the compactor side

(For guided ram machines only), and check guide shoes for wear.

THREE MONTHS

1. Check functional operation of controls and options (stop button, timers, lights, etc.).

2. Check hydraulic cylinder, internal hoses, and connections for leakage; check hoses

for chafing and wear.

3. Lubricate the container door hinges.

ANNUALLY

Lubricate electric motor bearings annually per the manufacturers instructions.

FILTER MAINTENANCE

1. The hydraulic filter should be cleaned at regular yearly intervals.

2. The filter may be removed from the unit by disconnecting the union on the suction

side of the pump, removing the four bolts retaining the cover plate, and lifting the

filter from the reservoir.

3. Care should be exercised in cleaning the filter to ensure that the element is not torn.

Clean the element with a soft brush and standard industrial solvent.

4. Replace the filter after cleaning and tighten the union securely. Pump noise and a

"crackle" sound is most often caused by air entering the pump suction line.

Tightening the suction fittings will usually eliminate the problem.

RECOMMENDED OILS FOR THE HYDRAULIC SYSTEM

WARNING:

RAM SPEED ACCELERATES AS RAM RETRACTS. NEVER ENTER

ANY PART OF THE SELF-CONTAINED COMPACTOR/CONTAINER UNTIL THE

UNIT HAS BEEN LOCKED-OUT AND TAGGED-OUT.

1. Union - Unax-46, Unax-AW46

6. Shell -Turbo 46, Tellus 46

2. Gulf - Harmony 47, Harmony 48-AW

7. Quaker State - Dextron ll (ATF)

3. Exxon - Teresstic 46, Nuto 46

8. Citgo - Pacemaker 46, Tellus - AW46

4. Texaco - Rando 46

9. Amoco - (Rycon)

5. Chevron - AW 46

«
...
15
16
17
18
19
...
»

Содержание Marathon RAMJET Signature J-250SC
















































Отзывы:

Нет отзывов