index
1.00 introduction
page
package contents
2
safety precautions
2
2.00 installation
installation/operation
3
3.00 tip/ULD chart
4.00 ULD identification
3
4
5.00 parts list
parts list / diagrams
6..00 troubleshooting
5
6
introduction
package contents:
1. Proportioner with U-clamp for mounting
2. Float with chain
3. Inlet tube, 1/4“ x 7‘ with weight and footvalve
4. Discharge tube 2ft.
5.
Metering tip kit or ULD pack
6. Instruction sheet
safety precautions
WARNING
please read precautions thoroughly before operation.
Unit must be installed in accordance with local regulations.
For Units installed in Australia:
THIS APPARATUS MUST BE INSTALLED IN ACCORDANCE WITH THE
REQUIREMENTS OF THE PLUMBING CODE OF AUSTRALIA (PCA)
AS/NZS 3500.1
THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS
Please use this equipment carefully and observe all warnings and cautions.
*******************************************NOTE*****************************************
WEAR
protective clothing and eyewear when dispensing chemicals or other materials or when working in the
vicinity of all chemicals, filling or emptying equipment, or changing metering tips.
ALWAYS
observe safety and handling instructions of the chemical manufacturer.
direct discharge away from you or other persons or into approved containers.
dispense cleaners and chemicals in accordance with manufacturer‘s instructions. Exercise CAUTION when
maintaining your equipment.
reassemble equipment according to instruction procedures. Be sure all components are firmly screwed or
latched into position.
KEEP
equipment clean to maintain proper operation.
ATTACH
only to water tap outlets (20 PSI dynamic Min., 80 PSI Maxi. and Max. water temperature 120° F).
NOTE
if the unit is used to fill a sink, or the discharge hose can be placed into a sink. The unit must be mounted
so that the bottom of the cabinet is above the overflow rim of the sink.
Page 2
Содержание Hydro HydroMinder
Страница 1: ...user manual HydroMinder Car Wash ...
