6
6
a
b
a
b
b
a
c
• Take the ingredient canisters by the handles
and pull them forwards (10). The lids are
automatically triggered open.
• If required, the ingredient canisters can be
removed by lifting canisters upwards and
pulling them forwards over the end stops in
the guiding rails.
• Fill ingredient canisters with ingredients.
• Press the lid slightly down and push back
the ingredient canisters
• Push the outlet tubes downwards to open
the outlet spouts of the canisters (11).
Cleaning parts
Drip tray and base tray
• Remove the lid (12,a) from the drip tray (12,b)
and empty the drip tray.
• Clean the drip tray and its parts.
• Clean parts in hot water with cleaning agent,
and wipe parts dry.
Wipe the sensor (12,d) in the lid dry.
• Wipe clean the base tray.
• Push base tray back in place (13).
• Relocate drip tray back in place (14).
Cup carrier
It is recommended to have the cup carrier
as an exchange kit (hygiene kit).
• Remove cup carrier: Take hold of the cup
carrier with your right hand (15,a) and with
your left hand remove the corresponding
retaining pin (15,b) situated on the rear side
of the cup station.
• Clean the drip grid (16,a) and tray (16,b) in
hot water with cleaning agent and dry parts.
12
10
(see overleaf)
Regular Cleaning (continued)
11
13
14
15
16
