Douglas Dynamics WESTERN ENFORCER 94040-3, Руководство по установке

Страница: 13 / 18

Lit. No. 74914, Rev. 01 13 June 1, 2020
OPERATIONAL TEST AND FINAL ADJUSTMENTS
BLADE DROP SPEED ADJUSTMENT
The quill in the valve manifold adjusts the blade drop
speed.
1. Lower the blade to the ground before making
adjustment.
2. Turn the quill IN (clockwise) to decrease drop
speed. Turn the quill OUT (counterclockwise) to
increase drop speed.
3. Stand 8 feet clear of the blade when checking
adjustment.
WARNING
Keep 8' clear of the blade when it is being
raised, lowered, or angled. Do not stand
between the vehicle and blade or directly in
front of the blade. If the blade hits or drops on
you, you could be seriously injured.
Quill
4. Remove and retain the two hairpin cotters,
washers, and clevis pins attaching the lift arm to
the lift frame.
5. Pivot the lift arm and lift ram forward and replace
the hydraulic unit cover.
6. Pivot the lift arm and lift ram up. Replace the two
pins, washers, and hairpin cotters to reattach the
lift arm to the lift frame.
Hairpin
Cotters
Washer
Washer
Clevis
Pin
Clevis
Pin
Lift
Arm