background image

16

WARRANTY

1201 E. 27th Terrace • Pittsburg, KS 66762 • U.S.A.

(620) 231-8568 • Fax: (620) 231-1598

E-Mail: [email protected] • Website: www.doughxpress.com

NOTICE

  Our system will automatically register the equipment on the date it was shipped. If the 

equipment was not purchased directly from HIX, but through a distributor (either domestic 

or foreign), please keep a copy of their sales invoice showing the serial number and date it 

was sold/shipped to you with this warranty. In this case, we will use the distributor’s invoice 

date as the beginning warranty date. 

STAPLE A COPY OF YOUR RECEIPT TO THIS 

WARRANTY

 and keep in a safe place to provide verification of your warranty should a 

problem occur. Thank you.

Please fill in the following information and attach a copy of your receipt for your records.

Date Purchased: _______________________   From:_____________________________

Model #: ______________________________  Serial #:___________________________ 

  This warranty applies to equipment manufactured by the HIX Corporation (HIX), Pitts-

burg, Kansas, U.S.A. HIX warrants to the original purchaser its Dough, Tortilla and Poultry 

Presses against defects in workmanship and material, except for wear and tear for a period 

of “One Year” from the date of purchase. All dough press carts, compressors, and accesso-

ries are warranted for 90 days from the date of purchase.

  In the event of a defect, HIX, at its option, will repair, replace or substitute the defective 

item at no cost during this period subject to the limitations of insurance and shipping costs 

stated below.

  This warranty does not cover normal wear and tear, damages due to accident, misuse/

abuse, alterations or damage due to neglect or lack of proper lubrication or maintenance. 

HIX shall not be responsible for repairs or alterations made by any person without the prior 

written authorization by HIX. This warranty is the sole and exclusive warranty of HIX and 

no person, agent, distributor, or dealer of HIX is authorized to change, amend or modify the 

terms set forth herein, in whole or in part.

  In the case of a problem with the equipment identified herein, HIX Corporation should 

be contacted during regular business hours to discuss the problem and verify an existing 

warranty. HIX personnel will assist the customer to correct any problems which can be 

corrected through operation or maintenance instructions, simple mechanical adjustments, 

or replacement of parts. In the event the problem cannot be corrected by phone, and upon 

the issuance of a return authorization by HIX, the equipment shall be returned to HIX or 

an authorized service representative. All insurance and shipment/freight costs are solely 

the responsibility of the customer, and not that of HIX, and HIX shall not be responsible for 

improper handling or damage in transit. HIX customer service personnel may be contacted 

for complete return authorization and reconditioning information.

  This expressed warranty is given in lieu of any and all other warranties, whether ex-

pressed or implied, including but not limited to those of merchantability and fitness for a 

particular purpose, and constitutes the only warranty made by HIX Corporation.

  In no event shall HIX’s liability for breach of warranty extend beyond the obligation to 

repair or replace the nonconforming goods. HIX shall not be liable for any other damages, 

either incidental or consequential, or the action as brought in contract, negligence or other-

wise.

  This warranty gives you specific legal rights and you may also have other rights which 

vary from state to state.

BEFORE warranty repair you MUST get                  

Prior Authorization:  Call 1-800-835-0606 

Warranty will be voided otherwise.

©2010 HIX Corp.

Содержание TXM-20

















Отзывы: