manualshive.com logo in svg

dough Xpress D-TXA-2-18W, Руководство пользователя

Поделиться
Скачать
dough Xpress D-TXA-2-18W Скачать руководство пользователя страница 8

8

 MACHINE PRESETS 

STORING PRESETS:
NOTE:

  The factory default settings for all presets is set to 200°F and 10 seconds.

1.  Set the desired temperature and/or cycle time using the temperature and time 

adjustment instructions in this document.

2.  Press and hold the desired preset location for two seconds. The controller will 

beep and the preset location button will display in reverse indicating the preset 

is stored in memory.

RECALLING PRESETS:

1.  Press and release for approximately 1/2 second the preset button to recall. 

The controller will beep and the preset location button will display in reverse 

indicating the preset has been changed.

NOTE:

  The new set values will display for 1 second before the controller starts 

adjusting the temperature or time to match the new setpoint.

PRESET 

LOCATIONS

TEMPERATURE 

SETTING

TIME 

SETTING

HOME MENU SCREEN

PRESET 1 SELECTED

(two preset setting shown)

PRESET 2 SELECTED

(two preset setting shown)

PRESET 

LOCATIONS

(press 1/2 second 

to recall)

Содержание D-TXA-2-18W

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды