manualshive.com logo in svg

dough Xpress D-TXA-2-18W, Руководство пользователя

Поделиться
Скачать
dough Xpress D-TXA-2-18W Скачать руководство пользователя страница 5

5

 

ADJUST TEMPERATURE:

1.  Touch the temperature readout on the display. “UP”

 ▲ and “

DOWN”

 ▼ arrows 

will appear on the right side of the display and the temperature value will start 

flashing and to indicate it is in set mode.

2. 

Press the “UP” ▲ or “DOWN” ▼ arrow to change the temperature value. Hold

-

ing down on an arrow will change the temperature in 1 degree increments for 

10 values; then change to 10 degrees incremental changes.

3.  Once the desired temperature value is set, either press the temperature value 

to lock the set temperature or simply wait for 2 seconds and it will lock in the 

new value automatically.

ADJUST CYCLE TIME:

1.  Touch the time readout on the display. “UP”

 ▲ and “

DOWN”

 ▼ arrows will ap

-

pear on the right side of the display and the cycle time value will start flashing 

and to indicate it is in set mode.

2. 

Press the “UP” ▲ or “DOWN” ▼ arrow to change the cycle time value. Holding 

down on an arrow will change the time in 1 second increments for 5 values; 

then change to 10 seconds incremental changes.

3.  Once the desired cycle time value is set, either press the time readout to lock 

the cycle time or simply wait for 2 seconds and it will lock in the new value 

automatically.

SETTING TEMPERATURE & TIME

TEMPERATURE ADJUSTMENT SCREEN

TEMPERATURE 

READOUT/SETTING

UP ARROW

DOWN ARROW

TEMPERATURE ADJUSTMENT SCREEN

UP ARROW

DOWN ARROW

TIME 

READOUT/SETTING

Содержание D-TXA-2-18W

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды