Page 12 of 12
Input
Both signal and power inputs are made via the same Ethernet RJ-45 connector. The
interface is powered by 802.3af PoE (Power over Ethernet) as standard, but the
E8ANL-DIN also has an auxiliary 18-48 VDC power input. This auxiliary power
connection is made via direct wiring to a terminal. The signal input supports both sACN
and ArtNet, and both can be used simultaneously. Levels from the protocols are piled
onto each other in a highest-takes-precedence fashion.
Outputs
The E8ANL-DIN has eight separate analog outputs and one DMX512 output. The
Ethernet input is isolated from the outputs, but the outputs are not isolated from each
other. The eight analog outputs are made via direct wiring to two 8-position pluggable
terminal blocks, with each terminal block containing four outputs and four commons.
Each of the eight analog outputs carry a 10 mA rating. The DMX512 output is made via
direct wiring to the 3-position pluggable Phoenix terminal block.
Limited Manufacturer's Warranty
Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor
warranty against manufacturing defects. It is the customer's responsibility to return the
product to DFD at the customer's expense. If covered under warranty, DFD will repair
the unit and pay for return ground shipping. If a trip is necessary to the customer's site
to solve a problem, the expenses of the trip must be paid by the customer.
This warranty covers manufacturing defects. It does not cover damage due to abuse,
misuse, negligence, accident, alteration, or repair by other than by Doug Fleenor
Design.
Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.
Doug Fleenor Design, Inc.
396 Corbett Canyon Road
Arroyo Grande, CA 93420
(805) 481-9599 voice and FAX
(888) 4-DMX512 toll free (888) 436-9512
web site: http://www.dfd.com
e-mail: [email protected]
