Install the Pole Assembly to Desk Edge
1. Place the Pole Assembly
(3)
over the open edge of the desk in the desired location.
(See Figure 3).
Tighten the Clamp
(4)
by turning the handle until the Pole Assembly is securely in place.
(See Figure 4)
2. To adjust the height of your monitor arm, loosen the Collar as shown. Position the Collar at desired height
and tighten with hand so the Collar assembly is firmly in place.
(See Figure 5)
Figure 5
Figure 3
Figure 4
INSTALLATION
Model: DS-27PS
