UIC-DX270 Series
User’s Manual Rev 1.0
- 33 -
10) CONFIGURE
※
Should change a setting number since a grasp called exactly a characteristic
.
※ Perfection shall be stopped, and setting is possible equipment.
Item
Description
Units
Step
Min
Max Default
View
Access
612
Comp. start method
Direct / YDelta / PWinding
YDelta
SVC1
SVC2
613
Inlet temp sensor
OFF / ON
OFF
SVC1
SVC2
614
Outlet temp sensor
ON
SVC1
SVC2
615
Discharge temp sensor
ON
SVC1
SVC2
617
Injection sol type
OFF / ON
ON
SVC1
SVC2
621
Start capcity method
1 - CR1:OFF, CR2:OFF, CR3:OFF
2 - CR1:OFF, CR2:OFF, CR3:ON
3 - CR1:OFF, CR2:ON, CR3:OFF
4 - CR1:OFF, CR2:ON, CR3:ON
5 - CR1:ON, CR2:OFF, CR3:OFF
6 - CR1:ON, CR2:OFF, CR3:ON
7 - CR1:ON, CR2:ON, CR3:OFF
8 - CR1:ON, CR2:ON, CR3:ON
9 – NONE
2
SVC1
SVC2
622
50% capcity method
3
SVC1
SVC2
623
75% capcity method
5
SVC1
SVC2
624
100% capcity method
1
SVC1
SVC2
1)
Compressor maker selection: Set up a control method.
A capacity control method, a compressor operating method is set up automatically.
2)
Select compressor operating method: Select operating method.
3)
Entrance/exit/discharge-gas temperature sensor selection: Set up whether or not there is by a
port of the temperature sensor which it was installed and use.
Use injection valve: Set up whether or not there is by use of a liquid spray valve.
4)
Configuration of an action to control capacity: operating/50%/75%/100% Select valve
configuration of an action to control capacity.
5)
capacity control does not call if we set up to NONE in Configuration of an action Relevant
to control capacity.