Technical data
Safety
Intended Use
The
dot-spot mini LED garden spotlight 3W
is intended for the effect lighting of plants and objects
and for permanent installation. It is designed for operation in moderate climates. The luminaire is
intended for operation on safety extra-low voltage. The
dot-spot mini LED garden spotlight sets
are
ready to plug in and can therefore also be installed by any technically experienced person.
Safety instructions
The applicable safety regulations must be observed during assembly. The
dot-spot mini
LED garden spotlight 3W
is operated with a protective low voltage of 24 V DC. To avoid
dangers and defects, disconnect the power supply unit from the power supply before start-
ing any work on the spotlight or installation.
Do not open the housing of the lamp. Only connect the LED spotlight to power supplies whose out-
put voltage does not exceed 24 V DC. Check whether the mains voltage matches that of the power
supply unit. Incorrect voltages can destroy the LED spotlight and the power supply unit.
Follow the installation instructions for the power supply unit. Do not overload the power supply! The
total output of all loads connected to the power supply unit should be approx. 10% less than the
nominal output of the power supply unit.
9
en
Spotlight
40 mm
52
mm
47 mm
40 mm
60 mm
200 mm
Voltage
24 V DC
Power consumption
3 W
Luminous flux
200 lm
Light colour
2700 K
Beam angle
40°
Connection cable
5 m with low voltage plug
Protection class
IP 67
Temperature range
- 25 °C – +50 °C
Storage temperature
- 40 °C – +80 °C
Overheat protection
THERMOPROTECT system
LED
not interchangeable, high-power branded LED, integrated driver
Housing
anodized aluminum and toughened safety glass 4 mm
Power Supply
Input
230 V AC, 50 Hz
Output
24 V DC
Power
20 W
Protection class
IP 65
