Dot Origin VTAP100-PACS, Руководство по установке

Страница: 7 / 14

3 Mechanical installation
The VTAP100 unit for OEM integration comprises a PCB with an integral antenna.
Figure 3-1 VTAP100 components
WARNING: Observe all Safety instructions when installing the VTAP100 PCB.
There is more detailed information in the next section about how to fit the VTAP100 unit inside the
Optional wallbox case, if used.
3.1 Power
Connect the PCB to a PC using only a MicroUSB to USB cable, or the optional captive USB cable, if
any. ( Never connect both at the same time).
The VTAP100-PACS model can alternatively be powered by connecting it to an access controller,
using the Wiegand connector supplied (see .
The VTAP100 is rated at 5V DC @ 50 to 150mA for power over USB. When powered over Wiegand it
is rated at 8V DC @ 30 to 100mA
3.2 Environment
The VTAP100 must be stored and operated under the following conditions:
l
Ambient temperature 0 to +50degC
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
VTAP100-PACS V3A INSTALLATION GUIDE PAGE 3