19
18
10. Use
10 - 1.
lnstall battery
10 - 2.
For the first use or when inserting new batteries wait between
10 minutes for the warm-up of the apparatus and when inserting the
new batteries.
10 - 3.
lf the device is not used for a long time, once you turn it on
again, the device will test the room temperature first and will delay
turning on for one or two seconds.
10 - 4.
Aim towards the forehead
(see the diagram below for the
positioning), from a distance of
5cm(2in), press the measuring key,
the temperature is displayed
immediately. Making sure there is no hair, perspiration, cosmetic or
cap covered on the forehead.
10 - 5.
When the room temperature
is significant difference, or there is
perspiration on the forehead,
You can take the temperature
behind the ear lobe. Making sure there
is no hair, perspiration, cosmetic or
cap covered .
11. Measuring Operation
11 - 1. Choosing The Temperature Unit - F1 Function
Press „MODE“ button for 2 seconds, the screen displays: F1. Select
„DOWN“ for degrees Celsius, „UP“ for degrees Fahrenheit.
11 - 2. Alarme Setup - F2 Menu
Press „MODE“ touch for 2 seconds, the screen displays: F1
.Press twice „MODE“ touch to get F2. Select „UP“ to increase the
threshold by 0.1 °c (0.1 °F), „DOWN“ to reduce it by 0.1 °c (0.1 °F).
Note:
The alarm threshold default value is 38°C (100.4°F).
11 - 3. Total Difference - F3 Menu
To ad just the total variation of your the Non-contact Body lnfrared
Thermometer. Press „MODE“ button for 2 seconds, the screen dis-
plays: F1. Press „MODE“ button two times to get F3. Select „UP“
to increase the difference by 0.1°c (0.1°F), „DOWN“ to reduce itby
0.1°c (0.1°F).ln the cases of seasonal or environmental changes a
verification and adjustment should be carried out.
Note:
This function is only effective Body
11 - 4. Buzzer ON/OFF - F4(F3) Menu
Press „MODE“ button for 2 seconds, the screen displays: F1. Press
three(two) times „MODE“ button to get F4(F3). Select „UP“ to open
the buzzer (a sound icon „ “ is displayed on the LCD screen),
press „DOWN“ to stop it (the icon disappear).
11 - 5. Exiting The Setting Mode
Press „MODE“ button until the screen turns off.
11 - 6.The Non-contact Body lnfrared Thermometer is specially
designed
to take the body temperature of a human being. For this, use the Body
mode. Measurement range for Body mode: 32 to 42.5°C (86 to 108°F)
You can also use the Non-contact Body lnfrared Thermometer to
measure the temperature of an area or an object, a food, a liquid or
a room temperature. For this, use the Surface mode. Measurement
range for Surface mode: 0 to 60°C (32 to 140°F)
lmportant: The area temperature differs from the internal body
temperature. To obtain the internal temperature always use the Body
mode.
Please make sure to select the Body mode for an internal temperature
reading and the Surface mode for an external area reading (bottle,
bath, room ... ).
11 - 7. Data Memory
Data memory automatically after temperature measurements,
which will display at the right corner of LCD. Press „UP“ or
„DOWN“ button to display the last temperature measurement.
Under the condition of power oft, press „UP“ and „DOWN“ button
together for two seconds, to display the last temperature measurement.
At this mode if change the order number to O and press „MODE“
button, then delete all memory data.
GB
GB
