Door Gap Sensor Setup
Step 1:
Unpack the Door Gap Sensor Reed Switch and its Magnet and open the
battery compartment on the side.
Step 2:
Insert the supplied 23A 12v battery ensuring the poles match those in the
Door Gap Sensor.
Step 3:
Put the wireless Door Gap Sensor Reed Switch and its Magnet together as
shown and then pull them apart. The sensor's red LED will flash.
DOOR MAGNET
DOOR GAP
8
Passive Infrared Sensor (PIR) Setup
Step 1:
Unpack the wireless PIR Sensor and open the battery compartment door on
the side.
Step 2:
Insert two 'AA' type batteries ensuring the poles (+ and -) match those in
the PIR and close the door.
¡
Do not insert the batteries the wrong way as it could cause damage
to the sensor
¡
Do not use rechargeable type batteries
¡
Do not use different types at the same time
9
