The Door Gap Sensor is a surface mounted magnet and
reed switch. The Door Gap Reed Switch is mounted on
the door frame and the magnet parallel on the edge of
the door so the two parts sit neatly together when the
door is closed. When the security system is armed and
the door is opened, indicating forced entry, the change
in proximity of the reed switch to the magnet changes
and the sensor sends a signal to the Main Unit triggering the alarm. The
Door Gap Sensor can also be used on windows to notify the Main Unit when
The handy Remote Control can be used to conveniently
arm and disarm the security system remotely. The"PANIC"
button on the Remote Control when activated, whether the
alarm is on or off, sends specific codes via the Main Unit to
your Monitoring Station. The Monitoring Station recognises
the 'panic code' and the operator responds according to
Remote Control
your instructions (e.g., notifies the police).
The Medical Alert Pendant is for medical emergencies. Upon
activation, whether the alarm is armed or not, the security
system sends specific codes to your Monitoring Station.
The Monitoring Station recognises the medical emergency
by the codes and the operator responds to the situation
according to your instructions (e.g., notifies the ambulance
Medical Alert Pendant
service).
Door Gap Sensor
a window is forced open.
WARNING
These premises are protected by
NZ
2 x Remote Control
Medical Alert Pendant
8 x Screws
8 x Wall Plugs
2 x Security Stickers
Security Services Forms
User Manual
Warranty Cards
(Cionyx and "SwapTech")
Equipment Summary
Main Unit
The Main Unit acts as both a normal telephone for
everyday calls and your alarm panel. It sends the
alert to the Monitoring Station via the telephone line
The PIR detects human movement by rapid changes in
temperature and motion. When movement is detected
the PIR sends a signal to the Main Unit triggering the
alarm. To avoid false alarms do not install sensors pointing
to areas of high temperature fluctuations or areas known
when the alarm is triggered.
PIR (Passive Infra-Red) Sensor
to have motion.
2
3
*6 x AA batteries not included
#4 x "AAA" batteries not included
"
"
REPAIR AND WARRANTY Limited Warranty
CIONYX PTY. LTD.
Thank you for selecting a Cionyx value for money product.
Cionyx Pty Ltd warrants this Product free from defects in material and
ship for one year from date of purchase.
Within this warranty period Cionyx Pty Ltd will repair or replace defective parts and / or accessories at no charge, provided
the Product is returned with proof of purchase (original invoice).
The buyer assumes all responsibility for proper selection, installation and maintenance. This warranty is invalid in any case
that the Product unit (body) is opened, modified or serviced by an unauthorized service firm.
Any replacement or repaired Product will be warranted from the moment of replacement or repair for the unused remainder
of the original warranty period or 90 days, whichever is the longer.
This warranty is void to the extent that failure of the Product results from modification, accident, abuse, misapplication or any
failure to observe instructions in the accompanying documentation (User's Manual) regarding proper unpacking, installation,
maintenance and/or service of the Product.
workman
Please refer and read to the enclosed 'SwapTech Replacement Guarantee' which ensures your satisfaction with this product.
If you have any questions /Queries please ring our Help Desk any time at your convenience.
Please register your 'SwapTech' warranty immediately and receive 12 months free operational support by
ringing the Help Desk now (Australia: 1300 736 963 /New Zealand: 0800 200 318 )
www.fortknoxsecure.com
SERIAL NO.:
ALARM ID NO.:
0800-604-560
0800-604-567
MONITORING STATION 1:
MONITORING STATION 2:
PLEASE CHANGE YOUR PASSWORD BEFORE USIN G THE UNIT
Copyright 2007 Cionyx Pty. Ltd.
