several
•
•
•
Using it with your Amazon Echo Dot
1.
Switch the DOSS Traveler speaker to Bluetooth mode,you can press
the ‘play/pause’ button for 3 seconds to keep it in pairing status.
2.
3. Speak with a clear voice right into the built-in mic
r
ophone loc
a
ted on
4.
5. If a call was received while you were listening to music, playback will
resume automatically once the call has ended.
To end a call, tap the button once again. You may also end
the call directly via your cell phone.
Waterproof, Shockproof, Dust-proof rated IPX66 for 100% protection
against water and dust. Rubberized rugged exterior for ultimate
impact resistance. Water-resistant HD loudspeaker with splash-proof
surface to increase mobility and usability for everyday indoor or
outdoor use such as at the beach, pool, boat, car, office, and more!
2.
1.
VII. Features
Modes: Low, medium, and high brightness; SOS (emergency signal)
You can connect the Amazon Echo Dot with the speaker via 3.5 mm
Aux-in cable or via Bluetooth. Here are the steps to connect via
Bluetooth:
Download the Amazon Alexa App, follow the standard setup
procedure to get the Echo dot connected to your home Wi-Fi.
3. Quick tips on how to use the handle belts:
Undo the two nuts counter-clockwise on the strap.
Remove the nuts from the straps, then put the strap through the strap
buckle.
Tighten the screw clockwise on the strap.
10.6 in
65.0 in
