V. Pairing the wireless speaker with your smart device
VI. Answering and ending a call using your speaker or
mobile phone
• Use the supplied USB cable to charge your portable spea
k
er directly
f
r
om your computer or d
e
vice with a mic
r
o USB port.
•
Mak
e sure th
a
t the spea
k
er is fully charg
ed be
fore using it for the
capacity, the LED will off
3 seconds.
the device.
1. Place your smart device and wireless speaker no more than 3 feet
away from each other.
several
seconds to turn it on.
3. Set your smart device t
o “
disco
ver
” the wireless spea
ker
. Once
powered on, a tone will be heard and a blue LED will start flashing.
Following after will be a prompt notification that the speaker has
entered into pairing mode.
4. Enable Bluetooth on your device and choose
DOSS Traveler
from
the list.
5. If pairing is successful, the LED will change to a steady blue and your
phone will confirm that the connection has been established. If the
pairing process fails after 60 seconds, please repeat the above steps
1 through 5.
1. When the
r
e is an incoming call, the spea
k
er will g
enera
t
e a
t
one and
Briefly press the button to pick up, long press to reject. You may
also press the answer button on your phone to take the call using the
speaker.
2.
•
