Your excellent helper in cable test!
3
Your excellent helper in cable test!
4
Product Operation
Turn on the device and enter the below main Menu
1. Continuity testing
Connect one end of cable to “CONT” port of tranmistter on
the left side, the other end to the RJ45 port of remote, Press
“OK” to start testing.
Only if a cable exsits short circuit, no matter it exsits cross,
breakage or not,the testing result will only display “Short”
information. If it doesn't exsit short circuit, then it would
display what actually it is.
C
ONT
S
CAN
S
etting
L
enght
P
OE
F
iash
1. CONT-- Test open, short, cross,ect for STP, UTP cable.
2. Length--measure length of lan cable, range is 2.5m~200m.
3. Scan--Analog/Digital/ PoE mode to locate lan cables.
4. PoE-- available for standard or non-standard PoE switch
(5~60V), identify AT or AF standard of PSE type.
5. Flash--locate network port by the flashing port light on
switch/ router.
6. Setting—Set Language, backlight time, auto-off time,
contrast and version.
C
R : 1 2 3 4 5 6 7 8
M : 1 2 3 4 5 6 7 8
C
R : 1 2 3 4 5 6 7 8 G
M : 1 2 3 4 5 6 7 8 G
（UTP lan cable
）
（STP lan cable
）
If the cable is a good one, the result will be as below.
1.1 Possible results
C
R : 1 2 3 4 5 6 7 8
M : 1 2 3 4 5 6 7 8
C
R : 1 2 3 4 5 6 7 8
M : 1 2 3 4 5 6 7 8
C
R :
M : 1 2 3 4 5 6 7 8
（Pin12,Pin45arebothshorted）
short
C
R : 1 2 3 4 X 6 7 X
M : 1 2 3 4 X 6 7 X
（Pin5&Pin8arebroken）
（Pin56,Pin18arecross）
（Goodcondition）
If the LCD screen display “Cable Open!”, there are several
reasons for this.
1. all the pins are open indeed. 2. no cable is connected.
3. the remote is not connected. 4. Connect with wrong port.
1.2 Cable Open
C
Cable open!
