L SERIES IP CAMERA USER MANUAL
3.3.5
Third party DDNS setting
User can also use third party DDNS, such as
www.dyndns.com
,
User must apply a free domain
name from this website and fill the info into the below blanks (Figure 15) and save the settings.
Then the domain name can be used.
Figure 15
Notice
：
Using the third party domain name, if the http port is not 80, the port number should be
adding to the domain name with colon. Example: http://btest.dyndns.biz:81
ﾧ
. Don’t enter port
number when you use manufacturer’s DDNS.
3.3.6
UPnP settings
If you enable UPnP, once the IP camera is connected into the LAN, it will communicate
with the router in the LAN and do the port-forwarding with open port of router
automatically. In figure 16, you only tick “Using UPnP to Port Mapping” to finish the
setting.
Figure 16
Before using the UPnP function, please make sure the router’s UPnP function has been
enabled. Not all the routers support UPnP perfectly. Please test if the router works well
with the equipment, if not, we suggest you to disable this function and do the port-
forwarding manually.
3.4 Alarm Settings
3.4.1
Alarm service setting
If user need to monitor a fixed area, when there is any motion, it will detect the motion
and trigger the alarm. In the motion detect sensibility, the smaller the value, the more
sensitivity.
13
