rev:12.07.17
2.4.
Assembly of condensaation dreinage system
Steam condensation can be observed during unit's work. It is completely normal and it is not an abnormality
in working. In order to siphon out condensate the unit is equipped with stub pipe placed on the right side.
It is essental to properly connect the pipe siphoning out the condensate.
Exemplary way of conneting the pipe is shown below. The pipe should have adequate diameter to the stub-
pipe (1/2"). It shoud be bent into letter "U" and suffused with water until stabilizing its level.
Shipon should be palced around 150 mm from the unit and radius should not be less than R=30 mm.
Given measures should be taken as minimal.
Optimal 400/600
4.
Proper positioning of the unit. It is essential to keep level of the base
5.
Exemple of pipe assembly to siphon out condensate
water level
EN
