Splitting Operation
21
6. Extend
wedge
Move Split Control Lever toward endplate to extend wedge and split log.
Important safety instructions:
Operator position
. ALWAYS operate the log splitter from the manufacturer's
indicated OPERATOR POSITION. (See diagram above.) Other positions are
unsafe because they can increase the risk of injury from crushing, cutting, flying
objects, or burns.
Remove hands
. Remove both hands from log before activating Split Control Lever.
Hand activate
. Use only your hand to operate the Split Control Lever. Never use
any other body part, or a rope, cable, or other remote device to actuate the control.
Second person
. Many accidents occur when there is more than one person involved
in loading and operating the log splitter. Only one person should operate the
controls.
If a second person is assisting in loading logs, the operator must NEVER
actuate the Split Control Lever until the assistant and all bystanders are at least 10
feet away. NEVER allow an assistant to hold the log in place while the operator
actuates the Split Control Lever.
7. Stop wedge
Release Split Control Lever to stop wedge movement when log is split.
WARNING:
Cracks in logs can close quickly and pinch fingers. Keep fingers away
from any cracks that open in partially split logs.
SPLIT CONTROL
Operator Position- Horizontal
Operator Position- Vertical
Содержание M2965020D
