20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: +1-763-428-0302 • www.dosko.com
20195 South Diamond Lake Road, Suite 100 • Rogers, MN 55374 • USA (Toll-Free): 866-298-3659 • International: +1-763-428-0302 • www.dosko.com
Models 337-13H & 357-13HE
BEFORE GRINDING STUMPS
• Be aware of all underground utilities before grinding stump.
STARTING GRINDER
• Press down on handle bar so that cutter wheel is off the
ground.
• Pull out on-off switch (located on control panel).
• Turn switch to “On” position (located on engine).
• Pull choke if engine is cold (located on engine).
• Set throttle about ¼ open (located on engine).
• Engage operator presence handle by pushing handle
(small diameter bar) towards “Handle Bar Bow.”
•
Recoil:
Pull recoil rope to start engine (located on engine).
Electric:
Turn key to start engine (located on engine).
• When engine starts — close choke.
GRINDING STUMP
• Push grinder to stump so that the stump is located just in
front of the cutter wheel.
• Using the brake lever — lock the one wheel.
• Pull throttle to full open (located on engine).
• Lower the cutter wheel slowly using a left-to-right motion to
grind the stump.
• Grind stump to desired depth.
• Handle bar may have to be adjusted to accommodate for
height of stump or desired depth. Raise or lower handle bar
to a comfortable safe position.
• Reposition grinder further on stump and begin this process
again.
: CUTTING WHEEL WILL CONTINUE
TO TURN FOR A SHORT PERIOD AFTER ENGINE IS
SHUT OFF.
Operating
Zone
Pin Adjustment
Handle Bar
Discharge Flap
Battery Box
(if equipped with
electric start)
Cutter Wheel
Disc
Control Panel with
On-Off Switch
Operator
Presence
Handle
Cutting
Tooth
Tooth
Gas Tank
Engine Throttle
& Choke
Side Discharge
Frame
Adjustable
Brake Lever
Handle Bar Bow
Handle Bar
Item # E786112
Recoil Rope
OPERATING INSTRUCTIONS
Belt Guard
Key Switch
(if equipped with
electric start)
Air Filter
Please reorder as needed.
These safety sheets are free of charge. Additional safety sheets are available online for your convenience at www.dosko.com. They are also available by contacting Dosko at 866-298-
3659 and requesting
Item #
E786
112
.
NOTE:
Please make sure that your customers sign the back of this safety sheet indicating they have read and understand the operating and safety instructions.
Know Your Dosko:
BEFORE STARTING OR USING THIS MACHINE, READ AND REVIEW THIS SAFETY SHEET! BE AWARE OF
ALL POTENTIAL DANGERS,
PROTECT WINDOWS AND VEHICLES FROM POSSIBLE FLYING DEBRIS AND BE AWARE OF
ALL NECESSARY SAFETY PRECAUTIONS!
ALWAYS
THINK
SAFETY
