Preparation before Use
Do not throw away the packaging materials after assembly, which can be used to store the product after use.
Do not turn on the power before the blades and guards are installed
Plug the AC adaptor into the socket only when the blades and guards have been properly installed
Base part.......................................................1
Unit top (with aroma lid) ................................1
Middle tube....................................................1
Dedicated AC adapter....................................1
Remote Control................................................................................1
Coin lithium battery (CR2025 • separate plastic bag packaging).....1
Aroma cotton (1 in aroma box).........................................................1
User
Manual (including Warranty Card)
...........
..............................1
Packing List
Warning
Attention
Assembly of base, middle tube and unit top
The middle tube can be removed or installed,
and the height can be adjusted freely.
■ When the product height needs to be
increased
①
Put the base on a stable position
②
Insert the middle tube into the base
③
Insert the unit top into the middle tube
※
In steps
②
and
③
, please note the mount-
ing direction of the middle tube and unit top
.
■ When the product height needs to be
decreased
①
Put the base on a stable position
②
Insert the unit top into the base
※
Please note the mounting direction of
the base and unit top
※
Please keep the middle tube properly when
it is not in use
※
Press the lock button and key to remove the
unit top and middle tube
Please use on a stable level surface
Please hold the handle to move
the product
Installation and Setup
There should be no gaps between the connection
parts. Pull slightly to confirm if the connection is
proper.
If the installation is not firm, the fan may shake
during running, which may lead to falling, drop and
other failures.
The product may drop when you hold the handle
with your hands.
1.
2.
After you purchase, please confirm if the following accessories are complete
《
Enlarged View of Connection
》
Confirm the rod and hole size
first, and insert the rods into
the holes at the same time
Lock
Unit top
Middle tube
The height is about
57cm when the
product is lowered
The height is about
100cm when the
product is lifted
Base part
Rear
Rear
4
