©
DOSATRON INTERNATIONAL /
11
All models
- Remove the nuts
(Fig. 2-A)
and ferrules
(Fig. 2-C)
from the
Dosatron inlet and outlet.
- Remove the plastic caps
(Fig. 2/3-B)
which block the inlet and
outlet of your Dosatron before connecting to the water supply.
- Make sure the watertight seals at the inlet and outlet of the Dosatron
are correctly positioned.
- Make certain that the water flows in the direction of the arrows on the
pump body.
- Wrap the thread of the nipple with Teflon.
- Screw the nipple
(Fig. 3-M)
into the vacuum breaker
(Fig. 3-V).
- Screw the whole assembly onto the dosing unit
(Fig. 3).
NOTE :
The Dosatron is shipped in OFF position
(see § “Incorporated
bypass”).
ASSEMBLING THE DOSATRON (cont...)
Fig. 2
A
C
B
B
version US
V
B
M
Fig. 3
w
at
er fl
ow
Automatic anti-siphon device
- Screw the nipple
(Fig. 3-M)
into
the anti-vacuum valve
(Fig. 3-V).
- Screw the assembly onto the dispenser
(Fig. 3).
Fig. 3