DÖRR EcoGun AS AUTO pro, Руководство по эксплуатации, Страница: 4 / 44

1 Product overview
1.1 Overview
Fig. 1: Product overview
1 Atomizer air control (R)
2 Horn air control (F)
3 Material flow control
4 Control air connection (C)
5 Spraying air connection (A)
6 Cap nut
7 Air cap
8 Material connection
9 Fastening bore
10 Housing
11 Leakage bore
1.2 Short description
The spray gun is intended for surface
coating. Compressed air is used to apply
material. The coating material is fed through
lines. The operation can be done with paint
circulation or tap line.
The conventional air cap (CF) is used for
decorative surfaces and an application with
more focus on the atomization.
The features of the conventional air cap (CF)
are:
Mist arm
Fine atomization
Transfer rate > 65 %
The conventional air cap (SF) is used for
decorative surfaces and an application with
more focus on the atomization.
The features of the conventional air cap (SF)
are:
Suitable for low viscosity media
Low material outflow rate
Very fine atomization
The air cap LVLP (LF) is used for applica-
tions requiring a good transfer rate and
spray pattern.
The Features of the air cap LVLP are:
Mist arm
Transfer rate > 75 %
Product overview
02/2020 EcoGun AS AUTO pro - MSG00005EN 4/44