DÖRR EcoGun AS AUTO pro, Руководство по эксплуатации, Страница: 17 / 44

WARNING!
Danger from harmful or irritant sub-
stances
Serious injuries or death can result if you
come into contact with dangerous fluids or
steam.
– Spray gun Check regularly for leakage.
Observe local regulations and mainte-
nance schedule.
– Ensure that the forced ventilation is
operational.
– Follow the safety data sheet.
– Wear specified protective clothing.
– Avoid contact (e.g. with eyes, skin).
WARNING!
Risk of injury due to escaping material
and compressed air
Escaping compressed material can cause
serious injury.
Before carrying out any work:
– Disconnect the system, in which the
spray gun is installed, from com-
pressed air and material supply.
– Secure the system against being
switched on again.
– Depressurize the lines.
CAUTION!
Risk of injury due to spring tension
The end cap of the spray gun is under
spring tension. If you remove the end cap,
the spring tension could cause the end
cap to jump out unexpectedly and cause
light injuries.
– Removing and installing end cap
8.2 Maintenance schedule
The maintenance intervals given below are based on experiential values. Maintenance intervals,
adjust individually if necessary.
Interval Maintenance work
Daily
Check condition and tightness (also of the connections
and lines).
Check fastening.
Before every change of material
Clean
Ä
7.2 “Cleaning”.
Monthly
Lubricate internal components Ä 8.3 “Lubrication”.
After each alteration Check grounding Ä 4.2 “Assembly”.
Maintenance
02/2020 EcoGun AS AUTO pro - MSG00005EN 17/44