Cleaning the air cap und nozzle
For a thorough cleaning you can remove the
air cap.
Disassembly
Fig. 10: Disassemble needle
1. Thread off and remove nozzle (4) with
end cap.
2. Remove needle spring (2) and plunger
spring (3).
3. Pull back complete needle (1) out of the
housing.
Fig. 11: Disassemble nozzle (with flat jet
nozzle set)
Fig. 12: Disassemble nozzle (with round jet
nozzle set or rotary jet nozzle set)
4. Loosen the cap nut (6).
5. Remove cap nut (6) and air cap (7).
6. Remove the nozzle (5) with an open-end
wrench (SW15).
7. Clean air cap using cleaning agent and
8. Wipe the cleaned air cap dry with a cloth.
9. Clean the nozzle in the cleaning bath.
Assembly
10. Insert and tighten nozzle (5).
Tightening torque: 12 to 15Nm
11. Fit the cap nut (6) and air cap (7).
12. Align air cap (7).
13. Hand-tighten cap nut (6).
14. Lubricate needle shank lightly with sili-
cone-free oil. Push in needle (1) care-
fully into the housing from the back.
Cleaning
02/2020
EcoGun AS AUTO pro HD - MSG00009EN
16/44
