II
- Device group II: all areas except
mining
2G - Device category 2 for gas
T6 - Temperature class T6: Surface tem-
perature, max. 85°C
X
- Specific conditions for safe operation
The following conditions must be observed
for safe operation:
The spray gun and the work piece must
be grounded.
Only use conductive lines.
Ensure that static electricity can be dis-
charged.
2.3
Staff qualification
WARNING!
Inadequate qualification
Wrong estimation of dangers can cause
serious injury or death.
– Only sufficiently qualified persons may
execute all work.
– Some work requires additional qualifi-
cation. Additional qualifications of spe-
cialized personnel are marked with a
“+”.
This document is intended for qualified per-
sonnel in industry and craftmanship.
Operator
The operator is trained specifically for the
field of work in which he works.
Furthermore, the operator possesses the fol-
lowing knowledge:
Technical Measures for occupational
safety and health
The operator is responsible for the following
work:
Operate and monitor the system/ product.
Introduce measures in the event of faults.
Clean system/ product.
+ additional qualification explosion pro-
tection
In addition to the knowledge of the various
specialist fields, the mechanic has knowl-
edge of regulations and safety measures
when working in potentially explosive areas.
Dürr Systems offers special product training
2.4
Personal protective equipment
Wear the required personal protective equip-
ment when working. Provide the following
personal protective equipment:
2.5
Residual risks
Explosion
Sparks, open flames and hot surfaces can
cause explosions in explosive atmospheres.
Serious injury and death could be the conse-
quence.
Before carrying out any work, make sure
that there is no explosive atmosphere.
Do not use sources of ignition and open
light.
Do not smoke.
Ground the spray gun.
Ground the work piece.
Only use conductive lines.
Safety
02/2020
EcoGun AA AUTO - MSG00008EN
6/48
