Doro PHONEEASY 110, Руководство пользователя

Страница: 20 / 24

English
this is to minimize the risk of any interference. It is normal for the
device to become warm during charging and this is not dangerous.
Hearing loop
The handset has a built-in hearing loop for those who wish to use their
hearing aid with this telephone. Select T -mode on your hearing aid to
enable the feature.
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment, extension cords and other phones.
If the problem is resolved, the fault is with some other equipment.
Test the equipment on a known working line (e.g. at a neighbour’s
house). If the equipment works there the fault is probably with your
telephone line. Please report this to your network operator.
No number shown when ringing
•
This function requires a Caller ID subscription from your service
provider.
Warning tone/Not possible to make calls
•
The batteries may be running low (charge the handset).
•
The hand unit may be nearly out of range. Move closer to a base
unit.
Telephone does not work
•
Check that the adapter/phone cord is connected correctly.
•
Check the charge status of the handset batteries.
•
Connect another functioning telephone to the network wall socket.
The telephone continues to ring
•
Some of the telephone’s ringers do not follow the line signal, which
means that the signal may continue for up to 8 seconds after
answering a call. Try changing ring signal.
If the telephone still does not work, please contact the place of
purchase for service. Don’t forget the receipt or a copy of the invoice.
16