Doro COMFORT 1005, Руководство пользователя

Страница: 13 / 20

English
Note!
Even when answering machine is OFF it will still answer after 10 rings, see
Remote access, p.10 .
Use from base unit
The digits on base unit will flash when there are new messages.
!
Switch the answering machine on/off.
9
/
n
Start playback/Stop playback.
/
Skip to previous/Skip forward.
X
Delete current message.
To delete all old messages after playback: Press and hold
X
until
you hear a beep.
+ / -
Increase/decrease volume.
Note!
If the base displays
– –
the answering machine is disconnected, or time/date is
not set. You need to set the date and time to gain full functionality.
On/off from base unit
Press
1
(on the base unit) to switch the answering machine on/off. If the base
unit’s display is flashing/showing
– –
the answering machine is disconnected,
or time/date is not set.
Outgoing message
The outgoing message (max 3 minutes) is heard by incoming callers. There are
two separate outgoing messages, one for
ANSWER ONLY
(callers cannot leave a
message) and one for normal answering function ANS & REC . Please also select
desired answer mode ANSWER MODE , see Setup from handset, p. 7 /.
1. Press . Select
ANS. MACHINE
. Press
OK
.
2. Select TAM SETTINGS . Press OK .
3. Select
OGM SETTINGS
. Press
OK
.
4. Select ANS & REC / ANSWER ONLY . Press OK .
5. Select
RECORD MESS
. Press
OK
.
6. After the long beep you can record your message (speaking 20 cm from the
keypad). Press OK .
7. The message will be played back to you. Repeat the above to change.
9