Doro COMFORT 1005, Руководство пользователя

Страница: 12 / 20

English
REMOTE ACC. Select remote access off/on.
COMPRESSION
Higher compression gives longer recording time but reduced
sound quality,
LOW
= best sound quality but about half memory
capacity.
BS SCREENING Enable/disable the function in base unit which is described
in chapter Screening, p.10 .
CHANGE PIN Change remote access code (default code is 0000).
Note!
The TIME SAVER function answers calls after 6 ring signals, until the first new
message has been registered - then the answering machine switches to answering
after approximately 2 signals. This is useful when using remote access; if you call
up the answering machine and there is no reply after four rings that means there
are no messages recorded and you can hang up before you are charged for the call.
Use from handset
New messages are indicated by flashing in the display in standby. Playback
always starts with new messages.
1. Press . Select
ANS. MACHINE
. Press
OK
.
2. Select MSG PLAYBACK . Press OK .
3. During playback following commands are available:
2
Delete current message.
4
Skip to previous.
5
Stop.
6
Skip forward.
Speaker Off/On.
v
/
V
Volume control.
On/off from handset
1. Press . Select ANS. MACHINE . Press OK .
2. Select
TAM ON/OFF
. Press
OK
.
3. Select desired setting. Press OK .
If the handset’s displays with a steady light the answering machine is
switched on. If there are new messages, the indicator will flash whether the
answering machine is off or on.
8