English
www.doro.com
7
Operation
Memory
This telephone has 10 indirect memories.
When a number is stored in a memory location, you need to press only two
buttons to make the call. The memories are stored on the keypad digits 0-9.
Storing Memories
1.
Press and hold
P
until
Setup
is shown.
2.
Enter a memory location
0
-
9
on the telephone keypad.
3.
Enter the desired telephone number (up to 22 digits). Use
C
to erase or
change an entry.
4.
Press
0
. The number is now stored.
5.
Enter another memory location to continue or press
C
to return to standby
mode.
Memory Dialling
1.
Lift the handset (or press the
s
button) and wait for a dialling tone.
2.
Press
P
.
3.
Select a memory location by pressing the relevant keypad number,
0
-
9
.
Press
r
. If you want a pause in the telephone number.
In case of a number change, store the new number in the location of the old one following
the procedure above.
Volume Control
The handset volume may be adjusted during a call using the switch located on
the handset.
The hands free speaker volume may be adjusted during a call using the switch
located on the right hand side of the base unit.
Ringer
The Ringer volume can be set to three modes – high, low or off – using the
switch located on the underside of the telephone.