English
The display
In standby mode the date and time, number of new and total number of calls stored
in the Caller ID memory will be displayed. Immediately following the connection of a
call, a call timer will be shown on the display.
Hearing aid compatible
This telephone is hearing aid compatible. Select the T mode on your hearing aid to
enable this feature.
Ringer
The ringer volume, melody and tone can be selected using the switches located on the
underside of the telephone behind the battery cover:
Labels/protective cover
The memory index cover can be accessed by carefully removing the transparent plastic
using a small flat blade screwdriver or similar.
Wall mounting
The telephone can be wall mounted using an optional wall mount bracket.
The wall mount bracket is available as an accessory, part number WB200/300 in white
or black.
1.
Fix the wall mount bracket on the back of the telephone.
2.
Secure two screws, vertically positioned 83 mm apart.
3.
The screws should locate into the two keyholes on the wall mount bracket.
4.
Activate the hanging peg (located by the hook switch) by lifting it upwards and
rotating it 180 degrees.
Making a call
Lift the handset and dial the required telephone number.
Pre-Dialling
You can enter and correct a telephone number before dialling.
1.
Dial the required telephone number. Mistakes can be erased using
C
.
2.
Press
DIAL
OR press
s
to dial the number.
Redial
Repeatedly press
REDIAL
to view the last 5 numbers dialled. Press
DIAL
OR press
s
to dial the number.
Volume control
The Handset/headset earpiece volume may be increased or decreased during a call.
Use
on the side of the phone to adjust the volume.
To adjust the speaker volume (hands free and group listening) use
on the side
of the phone.
