English
Volume control
The volume level in the earpiece can be increased or decreased using the volume
control knob on the side of the telephone.
Mute button
The microphone can be turned off/on during a call by pressing
MUTE
.
Redial button
If the number dialled is engaged or if the last number dialled is to be redialled, lift the
receiver or press the headset button
=
and press the
REDIAL
button.
On Hold
Press the
HOLD
button to place a call on hold. The LED next to the button will
illuminate. The call can be resumed by pressing the
HOLD
button again or from
another telephone connected to the same line.
Recall
Press the
RECALL
button followed by the extension number to transfer calls when
connected to a PBX. Access to additional network services can be gained by using the
RECALL
button,
*
and
#
keys. Contact your network operator for more information.
Select either TIME/EARTH recall using the switch located on the underside of the
unit.
Memory
The telephone will store 3 one-touch(M1-M3) and 10 two-touch memories (up to 21
digits). When a number is stored, you need only press one or two buttons to make a call.
Storing One-touch Memories
1.
Lift the handset and press
p
(ignore anything you hear in the earpiece).
2.
Press desired location M1-M3.
3.
Enter the phone number. Press
p
and replace the handset.
Dialing using One-touch Memories
Lift the handset and press desired location M1-M3.
Storing Two-touch Memories
1.
Lift the handset and press
p
(ignore anything you hear in the earpiece).
2.
Press
MEMORY
.
3.
Press desired location
0
-
9
.
4.
Enter the phone number. Press
p
and replace the handset.
Dialing using Two-touch Memories
1.
Lift the handset and press
MEMORY
.
2.
Press desired location
0
-
9
.
If you need to insert a pause in the telephone number press
REDIAL
.
If you need to change a number, store the new number in the same location as the old one.