background image

English

16 

www.doro.com

 

 English

www.doro.com 

17

Messages

SMS messages

This feature requires a current Caller ID subscription to be in place and only applies 

to text message users (SMS). The memory will store up to 30 messages, the maximum 

number of characters per message is 160. In standby mode new messages will be 
indicated by the indicator light above the display flashing and 

*

 will be shown in the 

display.

Please remember individual SMS features are country dependent and will vary or 

be unavailable. The following points are based on the UK service and may be of 

assistance, if difficulty is experienced please contact your network provider for 

assistance.

To register for the SMS text messaging service you can either send a text message to 

another telephone number, or text REGISTER to 00000.

-   Should you wish to reset your SMS settings text RESET to 00000.

-   You can also request a delivery report by entering 

*

 0 

#

 prior to any SMS message. 

-   An SMS message can also be sent to a telephone number that does not support this

    feature, and will be received as a voice message. 

   Not all networks (ie mobile, cable) are compatible. 

Further details regarding the SMS text message service are available from you local 

network provider. 

Reading new (incoming) SMS messages

1.

  Press 

Menu

.

2.

  Scroll using 

v

/

V

 to 

Message

. Press 

OK

.

3.

  Scroll using 

v

/

V

 to 

SMS

. Press 

OK

.

4.

  Scroll using 

v

/

V

 to 

Inbox

. The number of new SMS messages will be displayed. 

Press 

OK

.

5.

  Scroll using 

v

/

V

 to the required message. Press 

Read

.

6.

  Once you have read your message press Back to read another message, alternatively 

press 

Option

.

7.

  Alternatively press 

Option 

and select one of the following using 

v

/

V

.

Use 

(answer/forward)

Delete Entry

Delete List

Copy to Phoneb.

Содержание 850 colour













































Отзывы: