English
20
www.doro.com
English
www.doro.com
21
Registration
Select Base Unit
You can manually select which base unit you wish the handset to communicate
with, alternatively the unit can automatically select which base unit to
communicate with (AUTO).
1.
Press
w
.
2.
Scroll
{
/
}
to REGISTER. Press
0
.
3.
Scroll
{
/
}
to SELECT BASE. Press
0
.
4
. Press the corresponding number button (1-4) for the required base unit,
alternatively scroll
{
/
}
to AUTO.
5
. Press
0
to save.
Registering a New Handset
To enable the use of more than one handset a registration has to be performed.
Every new handset must be registered in order to use the current base unit.
Each base unit can handle up to 2 hand units.
On registration the handset is allocated a handset number for use on the new
base unit. The handset numbers are 1-2.
Additional handsets can be purchased from your local retailer. See also the
General Information chapter for more information.
1.
Press and hold
j
on the base unit until it beeps twice. Registration mode
will remain active for approximately 90 seconds.
2.
Press
w
.
3.
Scroll
{
/
}
to REGISTER. Press
0
.
4.
Scroll
{
/
}
to REG BASE. Press
0
.
5.
Select the base unit you wish to register to by pressing the corresponding
number button
1
-
4
. Previously registered base unit numbers will flash.
6.
Enter PIN number (0000 when supplied). Press
0
.
7.
If the registration is successful the handset will return to standby mode after
a few seconds (max 90 secs).
