background image

English

10 

www.doro.com

 

 English

www.doro.com 

11

Caller Identification

Explanation of Caller ID

Caller ID allows you to see who is calling before you answer a call, and see who 

has called in your absence. If a name is attached to the telephone number and 

stored in the phone book, the name will be displayed.

The call log will store up to 30 telephone numbers. When the log is full the 

oldest number will be deleted automatically, as the new call is logged. 
In standby new calls are highlighted with a flashing       

 in the display

, when 

scrolling answered calls are indicated by       . While scrolling through the Caller 

ID log the start/end of the list will be indicated be a long beep.

Please note!

In order for numbers to be shown, you must subscribe to the Caller ID service provided by 

your network operator and a current subscription in place. Contact your operator for more 

information. 

CID on Call Waiting

While on a call and another call comes in the display will show only the second callers name 

(if stored in the phone book or sent by the network operator). If the callers name is not stored 

in the phone book or sent by the net work the display will show         . In some countries the 

network operator sends the name MOBILE when the call is from a mobile network, in this 

case it will be necessary to press the 

0

 to see the number of the second caller.

Retrieving and Dialling Incoming Numbers.

1. 

Press        

2. 

Scroll 

{

/

to the required telephone number

.

 

Press 

0

 

the time and date 

the call was logged will now be displayed.

3.

  Press 

q

 to dial the displayed number, or press and hold 

x

 to return to 

standby mode.

Messages

Besides showing telephone numbers, the display may also show a number of 

messages.

UNAVAILABLE  

It is an International call or a call from a PBX (no 

information received)

WITHHELD  

Information on the number is blocked. The call could 

also be from a PBX. 

MOBILE.  

Transmitted by the network operator instead of the 

caller name.

Содержание 840





























Отзывы: