background image

English

14 

www.doro.com

Settings

Register a New Handset or Base Unit

To enable the use of more than one handset a registration has to be performed. Every 

new handset must be registered in order to use a base unit. A maximum number 

of 2 base units can be registered with each handset, and each base unit can handle 

up to 4 handsets.

Additional base units and handsets can be purchased from your local retailer.

Please also refer to page 18 for more information on Expanded Systems.

1.

  

Disconnect the main base unit electrical adapter for a few seconds, and then 

reconnect.

2.

  

Press 

w

 .

3.

  

Scroll using 

< <

/

> >

 until 

P

 starts flashing in the display. Press

0

.

4.

  

Enter the PIN code 

(1111 for this model)

. Press 

0

.

5.

  

The handset will now search for the base unit.

6.

  

If the registration is successful the handset will return to standby mode in a few 

seconds (max 90 seconds). If registration is unsuccessful repeat this procedure.

De-register a Handset

Handsets can easily be de-registered from a base.

1.

 

Press 

w

.

2

Press the keypad digits 

9 4

.

3.

 

Enter the PIN code (1111 for this model).  

4.

 

Press 

0

.

WARNING!

DO NOT deregister the main handset.

Содержание 5035

































Отзывы: