Dorner iDrive 3200 Series, Инструкция по установке, эксплуатации и ремонту

Страница: 8 / 48

Dorner Mfg. Corp. 8 851-702 Rev. A
3200 Series iDrive Belt Conveyors
Installation
2. Remove screws (Figure 11, item 1 & 2) or (Figure
12, item 1 & 2) , washers (Item 3) , nuts (Item 4) and T-
bars (Item 5) from brackets.
3. Insert T-bars (Figure 11, item 5) or (Figure 12, item 5)
into conveyor side slots (Figure 13, item 1) . Fasten
brackets (Figure 13, item 2) to conveyor with mounting
screws (Figure 13, item 3) .
Figure 13
Figure 13
4. Fasten brackets to support stand with mounting screws
(Figure 13, item 4) , washers (Figure 13, item 5) and
nuts (Figure 13, item 6) .
5. Tighten screws (Figure 13, item 3 & 4) to 60 in-lb (7
Nm).
Return Rollers
Cleated Belt and 4–6” (51–152 mm) Wide
Flat Belt Conveyors
1. Locate return rollers. Exploded views shown in Figure
14 & Figure 15.
Figure 14
Figure 14
Figure 15
Figure 15
2. Remove screws (Figure 14, item 1) & (Figure
15, item 1) and clips (Item 2) from roller assembly.
3. Install roller assemblies (Figure 16, item 1) as shown.
Tighten screws (Figure 16, item 2) to 60 in-lb (7 Nm).
Figure 16
Figure 16
8–48” (203–1219 mm) Wide Flat Belt
Conveyors
1. Locate return rollers. Exploded view shown in Figure
17.
Figure 17
Figure 17
2. Remove screws (Figure 17, item 1) and clips (Figure
17, item 2) from roller assembly.
3. Install roller assembly as shown (Figure 18, item 1) .
Tighten screws (Figure 18, item 2) to 60 in-lb (7 Nm).
Figure 18
Figure 18
NOTE
Mounting brackets for flat belt conveyors
shown.
1
3
2
5 4 6
1
2
2
1
1
2
2
1
1
2
2
2
2
1
1
2
1