Dorner AquaPruf 76P1 Series, Инструкция по установке, эксплуатации и запасным частям

Страница: 24 / 52

Dorner Mfg. Corp. 24 851-946 Rev. A
AquaPruf® Positive Drive Conveyors
Preventive Maintenance and Adjustment
3. Remove idler assembly (Figure 66, item 1) from each
end of tip up assembly (Figure 66, item 2) on conveyor
frame.
Figure 66
Figure 66
4. Place entire assembly on work surface (Figure 67) .
Figure 67
Figure 67
5. Remove tail plate (Figure 68, item 1) from assembly,
making note of orientation of tab (Figure 68, item 2)
and mating surfaces of puck rod (Figure 68, item 3) and
tail plate.
Figure 68
Figure 68
6. Remove tracking plate (Figure 69, item 1) from puck
rod (Figure 69, item 2) and idler shaft
(Figure 69, item 3) .
Figure 69
Figure 69
7. Remove outside idler puck end spacer
(Figure 70, item 1) .
Figure 70
Figure 70
8. Slide off the puck (Figure 70, item 2) from the puck
rod.
9. Remove inside puck U-spacer (Figure 71, item 1) from
puck rod and idler shaft.
Figure 71
Figure 71
10. Repeat as needed to remove remaining pucks.
2
1
1
2
3
1
2
3
2
1
1