Dorna Sports MotoGP, Руководство по установке и эксплуатации

Страница: 13 / 53

Page 13 MotoGP™ Game Software copyright 2015 PlayMechanix™ Inc. All rights reserved.
Networking Considerations
Each MotoGP game ships with a cross over cable for linking 2 games. Optionally, a hub and network
cables can be installed to link more games together.
Take care to protect exposed game wiring from general foot traffic around the game. Use a conduit or
wire way to protect cables, if needed. Network cables are not marked or coded. Mark the linking cables
for your games, if other such cables in the area could cause confusion. Avoid routing cables near
sources of heat, moisture, or electrical energy such as neon lights, compressor motors, etc.
Local Network Setup – 2 games
1. Turn off both game cabinets.
2. Remove the cross over network cable from the parts bag inside the cash box.
3. Connect each end of the cable to the Ethernet port of each game’s PC.
4. Route the cable through the notch on the back of each cabinet.
5. Turn on both game cabinets
6. Enter Diagnostic Mode for each game
7. Select Adjustments
8. Select Game Options
9. Adjust Cabinet Link Number to give each game a unique number
10. In the Online menu, select Connection Wizard
11. When prompted, select Local and wait for the process to complete.
Local Network Setup – 3 to 8 games
1. Acquire a network hub with enough ports and the correct number of cables to support the
desired number of games. Cables and hub are not supplied with the games.
2. Turn off all game cabinets
3. Connect an Ethernet cable to the Ethernet port on each game’s PC
4. Connect each game’s Ethernet cable to the network hub.
Consult network hub manual for any additional considerations specific to the hub.
5. Turn on all game cabinets
6. Enter Diagnostic Mode for each game
7. Select Adjustments
8. Select Game Options
9. Adjust Cabinet Link Number to give each game a unique number
10. In the Online menu, select Connection Wizard
11. When prompted, select Local and wait for the process to finish.