background image

EN

TS 97 FL XEA

WN 059870 45532/13715 
2019-08

Mounting instructions

About this document

1.1  Contents and purpose 

This manual describes the installation, startup, 
maintenance and disassembly of the TS 97 FL XEA 
door closer. The manual’s picture section is partly 
supported by text in this section of the manual.

1.2  Target group 

The hold-open system’s mounting, commissioning, 
maintenance and disassembly must only be carried 
out by qualified personnel that have been authorized 
by dormakaba. The acceptance inspection must only 
be carried out by qualified personnel certified for this 
by dormakaba. 

1.3  Other applicable documents

The following documents belong to the unit’s 
complete documentation and must be observed: 
•  Drilling template
•  Picture section for mounting instructions
•  General design approval
•  Information sheet about the use of hold-open 

systems

1.4  Documents storage 

This manual must be kept during the service life of the 
product and must be passed on with the product. 

1.5  Safety instructions

CAUTION

This signal word indicates a situation of 
potential risk, which could lead to minor or 
slight injury if not averted.

1.6  Symbols used

1.

2.

Step-by-step graphics

dormakaba Deutschland GmbH

Postfach 4009

58256 Ennepetal

19

0432-CPR-00026-58

EN 1154:1996/A1:2002/AC:2006
EN 1155: 1997/A1: 2002/AC:2006

3 8 3-6 1 1 4

DOP_0172

Contents

About this document 

1

1.1  Contents and purpose  

1

1.2  Target group  

1

1.3  Other applicable documents 

1

1.4  Documents storage  

1

1.5  Safety instructions 

1

1.6  Symbols used 

1

1.6.1 

Tool icons 

1

2 Safety 

1

2.1  Intended use 

1

2.2  Prerequisites for the operation of hold-open 

systems 

2

2.3  Requirements for the electrical installation by the 

customer 

2

Product description  

2

3.1  Technical data 

2

3.2  Optional components 

3

4 Mounting 

3

4.1  Mounting variants 

3

4.2  Mounting the door closer and slide rail 

3

4.3  Mount lever arm 

3

4.4  Adjust door closer 

3

4.5  Mount the cladding 

3

4.6  Set the doorstop 

3

4.7  Function test  

3

4.7.1 

Freewheel function 

3

4.7.2 

Close door 

3

Disassembly, recycling and disposal 

3

Содержание TS 97 FL XEA

Страница 1: ...life of the product and must be passed on with the product 1 5 Safety instructions CAUTION This signal word indicates a situation of potential risk which could lead to minor or slight injury if not averted 1 6 Symbols used 1 2 Step by step graphics dormakaba Deutschland GmbH Postfach 4009 58256 Ennepetal 19 0432 CPR 00026 58 EN 1154 1996 A1 2002 AC 2006 EN 1155 1997 A1 2002 AC 2006 3 8 3 6 1 1 4 D...

Страница 2: ...e opposite side to the hinge for fire protection doors 2 2 Prerequisites for the operation of hold open systems The use of hold open systems is subject to special provisions due to the official approval regulations These provisions relate in particular to acceptance ongoing monitoring and maintenance Observe the instructions in the information sheet on the use of hold open systems Additional requi...

Страница 3: ...is loosened during repair or maintenance work the screw must be replaced by a new self locking original screw Mount the lever arm according to the illustrated instructions and the mounting variant 4 4 Adjust door closer 9 Adjust the door closer power 10 1 Adjust the closing speed 2 Adjust the end stop 4 5 Mount the cladding 11 13 Carry out the mounting according to the enclosed illustrated instruc...

Страница 4: ...dormakaba Deutschland GmbH DORMA Platz 1 58256 Ennepetal Germany T 49 2333 793 0 F 49 2333 793 4950 www dormakaba com Translation of the original manual subject to change without notice ...

Отзывы: