2
TS 97 FL XEA
2019-08
dormakaba Mounting instructions
Safety
WN 059870 45532
1
2
Position numbers of components
The icon indicates the installation
stages of the supplied cable loop
The icon indicates installation stages if
the supplied cable loop is not mounted.
The icon indicates installation stages
when the door closer is mounted on the
door leaf.
The icon indicates installation stages
when the door closer is mounted on the
door lintel.
1.6.1 Tool icons
Allen wrench,
e.g. wrench size 3
2 Safety
2.1 Intended use
The TS 97 FL XEA is intended solely for the controlled
closing of swing doors with the following properties:
• Maximum door leaf weight 180 kg
• Maximum door leaf weight 1,400 kg
• Maximum door opening angle approx. 145° when
TS 97 FL XEA is mounted on the door leaf on the
hinge side, on the lintel on the hinge side, or on the
lintel on the opposite side to the hinge.
• Maximum door opening angle approx. 105° when
TS 97 FL XEA is mounted on the door leaf on the
opposite side to the hinge.
• The swing door’s opening angle must be limited by a
doorstop.
• An external manual release button is required to
interrupt the power supply. The manual release
button must not be covered by the opened door.
Observe country-specific regulations when using on
fire barriers, fire protection doors and smoke barriers.
Do not operate the TS 97 FL XEA on the lintel on the
opposite side to the hinge for fire protection doors.
2.2 Prerequisites for the operation of hold-
open systems
The use of hold-open systems is subject to special
provisions due to the official approval regulations.
These provisions relate in particular to acceptance,
ongoing monitoring and maintenance. Observe the
instructions in the information sheet on the use of
hold-open systems. Additional requirements apply for
use as fire/smoke protection closure in conjunction
with external RMZ and RM. A separate verification
of suitability is required for the respective fire/smoke
protection door.
2.3 Requirements for the electrical
installation by the customer
Before mounting, connect the cables to the TS 97 FL
XEA’s 24 V DC power supply. Only use the cable loop
supplied when mounting the TS 97 FL XEA on the door
leaf’s hinge side.
3 Product description
The TS 97 FL XEA is a slide rail door closer with
freewheel function. The door closes automatically in
the following cases:
• In case of power failure
• In connection with an external RMZ in case of fire
• In conjunction with an external manual switch
7° - 0°
145° - 0°
3
4
6
5
1
2
Fig. 1
TS 97 FL XEA in DIN-L mounting on the door leaf
(1)
Slide rail (without cladding)
(2)
Lever arm
(3)
TS 97 FL XEA (without cladding)
(4)
Adjusting screw for adjusting the closing force
(5)
Valve for adjusting the closing speed
(6)
Valve for adjusting the end stop
3.1 Technical data
Supply voltage operating
voltage
Power consumption
24 V DC +/- 15 %
approx. 3 W
Ambient temperature:
-15°C to +40°C
Rel. humidity:
up to 93%
(non condensing)
Protection class:
IP 54
