Dormakaba TP/TA EASY Safe, Инструкция по монтажу, Страница: 1 / 20

WN 060028 45532/14241
2020-11
EN
TP/TA EASY Safe
Mounting instructions
Contents
1 Information about this document 2
1.1 Contents and purpose 2
1.2 Target group 2
1.3 Other applicable documents 2
1.4 Document storage 2
1.5 Abbreviations 2
1.6 Symbols used 2
1.6.1 Hazard categories 2
1.6.2 More symbols 2
1.7 Customer service 2
2 Safety 2
2.1 Intended use 2
2.2 Reasonably foreseeable misuse 2
3 Product description 3
3.1 Technical data 4
3.1.1 Double-action doors 4
3.1.2 Single-action doors 4
3.1.2.1 Single-action door in all-glass system 4
3.1.2.2 Single-action door in door frame –
24/26 rebate depth 4
3.1.2.3 Single-action door in door frame –
27 mm to 40 mm rebate depth 4
3.2 Variants 5
3.2.1 Variants 5
3.2.1.1 Door rail for single-action doors 5
3.3 Components 5
3.3.1 Top pivot points 5
3.3.2 Bottom pivot points 5
3.3.3 250 mm lock module 5
3.4 Accessories 5
3.4.1 Floor door closer (FDC) 6
3.4.2 Floor bearing (01.106) 6
4 Mounting 7
4.1 Cleaning the glass surfaces 7
4.2 Mounting the door rail 7
4.3 Mounting the lock module 8
4.3.1 Mounting the latch lock and
floor-locking deadlock 8
4.4 Mounting the door strap for single-action
doors (TA) 9
4.5 Mounting the panel 10
4.5.1 Mounting the panel with a top door
rail with bushing in insert and PT 21
on the ceiling
10
4.5.2 Mounting the panel with a top door
rail with bushing in insert and PT 24
or PT 25 on the ceiling
10
4.5.3 Mounting the panel with a top door
rail with two-part insert for RTS
11
4.5.4 Mounting the panel with a top door
rail with two-part insert for PT 21,
PT 24 or PT 25
11
4.5.5 Mounting the panel with a top door
rail with top pivot bearing
12
4.6 Aligning the panel 12
4.7 Gluing the top door rail to an LSG glass panel
(optional) 13
4.8 Mounting the side panel 13
4.9 Aligning the side panel 14
4.10 Mounting the cover profiles 14
4.11 Finalizing the lock module 15
4.12 Mounting the end covers 16
4.12.1 65 mm and 55 mm pivot point 16
4.12.2 20 mm pivot point 16
4.12.3 Free glass edge 16
4.13 Mounting accessories 17
4.13.1 Mounting the strike plate bushing 17
4.13.2 Mounting the eccentric bushing 17
5 Maintenance 18
6 Cleaning 18
7 Troubleshooting 18
8 Disassembly and disposal 18
8.1 Removing the cover profiles 19
8.2 Removing a faulty electric strike release 19
8.3 Replacing the electric strike release 19