11
TP/TA EASY Safe
2020-11
dormakaba mounting instructions
Mounting
WN 060028 45532
4.5.3 Mounting the panel with a top door
rail with two-part insert for RTS
1.
Slide the top door rail onto the glass. The screw
heads must be on the inside.
2.
Align the top door rail with a distance of 4.5 mm
(Fig. 19).
3.
Tighten the screws so that the top door rail
clamps firmly on the glass (Fig. 20).
4.
Place the panel at the bottom on the floor
bearing and swing in.
5.
In doing so, insert the pin in the top insert in the
RTS spindle.
Fig. 21
Inserting the pin
6.
Secure the panel in the position with the screw-on
plate on the RTS. Tighten the screws first from
one side, then from the other.
Fig. 22
4 mm
12 Nm
Securing the screw-on plate
4.5.4 Mounting the panel with a top door
rail with two-part insert for PT 21,
PT 24 or PT 25
1.
Slide the top door rail onto the glass. The screw
heads must be on the inside.
2.
Align the top door rail with a distance of 4.5 mm
(Fig. 19).
3.
Tighten the screws so that the top door rail
clamps firmly on the glass (Fig. 20).
4.
Place the panel at the bottom on the floor
bearing and swing in.
5.
Attach the insert to the pivot (PT 21, PT 24 or
PT 25).
Fig. 23
Attaching the insert
6.
Place the panel at the bottom on the floor
bearing and swing in.
Fig. 24
Swinging the panel in