10
Quantum II RFID ECU
PK3724_T 05-19
6 Final Test and Inspection
Electronics / Keys
Apply power to the 2 white wires of the ECU. The green LED on the card reader should flash 4 times indicating
a power on reset.
The ECU comes construction programmed from the factory or can be programmed to the property. Refer to
the Saflok System Manual for programming instructions.
Present the appropriate key (construction or property) to the face of the reader. The reader should flash the
green LED and activate the relay for 5 seconds.
During the 5 seconds press the appropriate call button on the elevator panel.
If the ECU is programmed to the property verify that all property programmed keys function to the specifica-
tions of the properties key design.
Appearance
Verify that the readers finish is free of blemishes or scratches that would distract from the ECUs appearance.
